Suzuki Grand Vitara SQ416/SQ420/420WD

Since 1998 of release

Repair and car operation



Suzuka Grandee Vitara
+ The general information
+ Maintenance service and greasing
+ Heater, ventilation and the conditioner
+ Steering
+ Suspension bracket
+ Wheels and tyres
+ Forward приводной a shaft shaft/bearing. An oil epiploon
+ Kardannye shaft
+ Brake system
+ Engines
+ Fuel system
+ Ignition system
+ Start system
+ Release system
+ Transmissions
+ Coupling
- Transfer
   The general description
   + Diagnostics
   - Service out of a workshop
      Oil of a distributing box
      The gear change lever
      The switch of transfer of the all-wheel drive car
      + Oil epiploons of transfer
      The gauge of speed
      Back fixture of the engine
      The transfer module
      Removal
      Installation
+ Forward and back differentials
+ Windows, mirrors, locks and security measures. An immobilizer
+ Electric equipment




Service out of a workshop

Oil of a distributing box

Check and replacement

 PERFORMANCE ORDER

  1. Before check and oil replacement switch off the engine and lift the car horizontally.
  2. At the lifted car check up level of a liquid and leak. If leak is found out, adjust or eliminate it.

The diagramme of viscosity SAE (society of automobile engineers of the USA)

 
  1. Merge old oil, having removed a drain stopper (1).
  • Each time at lifting of the car for any service check, whether there is no oil leak, and a condition of hoses сапуна.
  • If in the merged oil there will be a water or a rust impurity, check up a hose сапуна and a transfer casing.
  1. Fill in the new specified oil, to the specified volume (to уровневого apertures).

Very much it is recommended to use oil for transfer SAE 75 W-90.

  • The specification of oil for transfer:
    • Oil mark: API GL-4
    • Viscosity: SAE 75 W-85, 75 W-90 or 80 W-90
    • Oil volume: 1.7 litres (3.6/3.0 США/Imp. Pints)
  1. Tighten a drain stopper (1) and urovnevuju / a filling stopper (2) to the specified value of the moment of an inhaling, having put preliminary on a carving of stoppers (1 and 2) hermetic. “A”: hermetic 99000-31110. The inhaling moment (a): 23 Н•м (2.3 kg th, 17.0 pounds-foots).
1 — a drain stopper
2 — urovnevaja / a filling stopper
3 — the transfer case